The Yamaha Sidewinder SRX is ready to defend its title as the world's fastest production snowmobile. Spring Power Surge Exclusive.
5. NEW ARCS Front Suspension
The new Advanced Roll Center Suspension (ARCS) features taller, high strength, forged alloy spindles and redesigned lightweight upper Arms. The geometry is further revised to optimize suspension function while increasing ground clearance. This results in greater bite with less chassis roll for more predictable and consistent handling.
6. Low Profile SRX 137 Suspension
The Sidewinder SRX LE utilizes special suspension calibration with dual rate front shock springs, and low preload rear torsion springs to provide a lower ride height through additional suspension 'sag'. The lower profile enhances top speed performance while helping keep the sled level in tight corners. The softer initial spring rates are consequently more progressive, ramping up deeper in the stroke to resist harsh bottoming while full travel is still available when unweighted. The SR 137 skid remains a “coupled” suspension that
utilizes a unique “sliding” front arm mount. With up to half-inch of movement at the front arm “slot”, the system allows the SR 137 to deliver controlled (reduced) ski-lift during acceleration while still retaining front arm bump compliance. The solid rear axle design and
large diameter rear wheels provide maximum strength while special front idler wheel layout increases clearance for iQS, plus reduces friction, for greater durability and performance .
7. EBRS Engine Braking Control
The effect of 4-stroke 'engine braking' when the throttle valves are closed has a significant impact on handling and ride character. Yamaha developed a special system which employs the ISC (idle speed control) circuit and ECU map using throttle valve movement and RPM information to reduce negative intake pressure during deceleration.
High Tech Turbo
The Nickel alloy turbine body is extremely strong and precise, able to withstand highly elevated temperatures. Supported by premium, ceramic ball bearings, the Inconel turbine blade assembly is very light and strong. This yields a low moment of inertia for lightning quick response to exhaust gas input. Triple throttle bodies are used exclusively to further enhance the quick delivery of compressed air from the impeller to intake valves.
Mitsubishi Electronic Control Unit
The Yamaha-developed Mitsubishi ECU uses a series of 9 sensors to gather running condition data which it computes using a predetermined memory ‘map’. It then adjusts ignition timing, fuel delivery, manifold air-pressure and turbo boost pressure to produce
maximum performance under any condition - reliably.
Triple Throttle Body Induction
Yamaha wanted an engine that's exceptionally quick to respond with little or no 'lag' as found in a conventional turbo. One of the ways they achieved their goal was to develop an intake system using three separate throttle bodies positioned very close to the intake valves. Instead of just one feeding long intake tubes — something that is not seen in any other production turbo on the planet. And another first for Yamaha with the Genesis turbo.
Electronic Air Bypass Valve (ABV)
Unlike conventional turbo 'blow-off' valves, the Yamaha ABV redirects air pressure back into the intake side of the compressor to prevent surge and help maintain impeller speed, always at the ready for the next acceleration with seamless power delivery.
Liquid Cooled Turbo Body
Engine coolant is circulated through the turbocharger to control both under-hood temperature and help cool the intake charge. Upon engine shut down, the convection energy produced by super-heated coolant at the turbo head keeps it circulating without the coolant pump in operation. This eliminates the need for an engine cool down cycle while maintaining high durability in the turbo components.
Centralized Mass Design
The SRV chassis layout was engineered with the goal of centralizing mass. Approximately 60% of the sled's weight is tightly centered within the main triangulation. The result is a quick-handling, well balanced sled, that's fun to throw around in a wide variety of
conditions.
SRV Front Suspension Geometry
The SRV front suspension geometry is aimed at managing spindle camber, resulting in minimized bump-steer and maximized cornering bite giving rider confidence in varying trail conditions. The A-arms are mounted at a 30-degree angle from the sled's centerline to efficiently dissipate impact force throughout the entire chassis. Likewise, the front shocks mount directly to the leading spar so that trail forces are routed to the strongest part of the chassis. Wide a-arm spacing minimizes flex and stress in the front suspension system, which means consistent and confident corner handling.
Lightweight, Rigid SRV Chassis
The SRV chassis combines a load-bearing triangulated structure with lightweight aluminum construction to create a neutrally balanced sled that's centered on the rider. The pyramidal upper frame creates chassis strength without excessive weight.
Low Profile Ripsaw Track
SRX uses a 137" long, low 1" profile multi-ply track in a 2.86, fully clipped configuration. The lower lug profile yields less wind resistance at high speed while the fully clipped track reduces friction to provide maximum top speed performance. Additionally the low lug reduces weight and stress on the track for improved durability and performance at sustained high speeds.
Over-The-Engine Steering
The straight steering post on the Sidewinder SRX LE is configured over the engine. It connects to a single bell crank for simplicity and light weight. The design also minimizes free-play in the steering system and delivers a tight turning radius.
Tapered Tunnel Design
The Sidewinder SRX LE's light weight, two-piece, tapered tunnel gives you strength for the long haul and a tapered "fit" for enhanced leg comfort and overall ride positioning. The reinforced running boards are punched with aggressive boot hold serrations and offers excellent snow evacuation to keep your feet planted where you want them.
Heated Trail Seat
A standard heated seat provides the ultimate in warmth and comfort on even the coldest of winter days. A simple flip of the dash-mounted switch allows you to choose from two settings of warmth allowing you to explore what lies beyond that next curve from sun-up to sundown in complete comfort.
Stealth Control System
The handle bar controls feature a left hand switch cluster which allows for 'on the fly' access to the IQS electronic suspension adjustments along with multi-step hand and thumb warmer adjusters. Information available on the multi-function gauge can be easily selected with a toggle switch and the push button reverse gear switch is also located in the left hand cluster. The right side of the bar is clean with an ergonomically shaped throttle lever and simple, stand-alone emergency stop switch. An updated Hayes Stealth brake cylinder equipped with a composite Stealth brake lever provides greater modulation for better feel and powerful stopping performance.
Tunnel Flares
Flexible tunnel flares are included to reduce snow swirl and minimize wind resistance at higher speeds.
Push Button Electric Start
As with all Yamaha 4-stroke powered snowmobiles, there is no need to pull on a string to bring the engine to life. Easy electric starting is achieved through a simple handlebar mounted, glove friendly, pushbutton switch.
20" Tunnel Bag
Additional storage is provided by a convenient new under-seat bag. It's semi-rigid design makes it easy to access and is water resistant to keep your spares safe and dry.
Engine Type | Turbo 4-Stroke / 998cc |
Engine Class | Ultra Performance |
Clutch / Transmission | YSRC |
Fuel Delivery | Electronic Fuel Injection |
Fuel Capacity | 8.9 gal. (33.61L) |
Front Suspension | Independent, Double Wishbone |
Front Shocks | Fox® 1.5 Zero™ iQS® w/SRX Dual Rate Springs |
Front Travel | 10" (254mm) |
Ski Type | Tuner III |
Rear Suspension | Dual Shock SR 137 |
Rear Shock(s) | Fox® 2.0 Zero™ iQS® |
Rear Travel | 13.5" (343mm) |
Center Shock | Monotube Alum-HP GAS 1.5 |
Headlight | LED |
DC Output | Automotive & RCA |
Heated Seat | Standard, Hi/Lo |
Electric Start | Standard |
Reverse | Standard |
Track / W x L x H | 15 x 137 x 1.00" (381 x 3480 x 25.4mm) |
Track Type | Camso® Ripsaw™ I |
Ski Stance (ctr to ctr) | 42" (1067mm) adjustable |
Midnight Black/Liquid Silver |